Boat Cleaner, Salt Wash and Surface Protection. SALTY MUCK 1L

HIGHLY CONCENTRATED: 1L MAKES up to 675 L at 675:1.

Finally after so many requests from customers, our SALTY MUCK 1 Litre is now ready and available.

Salty Muck safely removes salt and grime. It also leaves a water sheeting, protective coating.

It is Highly Concentrated and Biodegradable. Recommended dilution of 1:250 ( to enable the nano protection to be applied ), but can go up to 1:675.

Salty Muck is a low foaming cleaner with an active sheeting action to resist streaking and spots.

Use on Boats, Kayaks, PWC’s, Trailers, 4x4's, Dive Gear, fishing tackle and surfaces exposed to corrosive salt.

Safe to use on any surface including aluminium, fiberglass, steel, magnesium, chrome, plastic and rubber.  Use Salty Muck  during regular maintenance and washes to increase longevity and function for years to come.

Contains: Plant derived surfactants & emulsifiers, antimicrobial preservatives, water sheeting agents.

APPLICATION and DILUTION:

NOTE: Test product on hidden spot to ensure compatibility, prior to application. No liability will be accepted.

Cleaning and Washing  

For application, use a recommended method below to apply a diluted ratio of Salty Muck to your boat or equipment. Agitate heavy grime if necessary.

1. Hose Soap Gun: Use 20% Salty Muck with 80% water, then set gun at 

45 : 1 ( #1 on dial  ) to get a 250 : 1 recommended ratio for regular washing + applying the nano protective coating.            

For lighter muck, set the dial to 135 :1 ( #0 on dial ) which will be 675 : 1 final ratio.

For heavier muck, set the dial to 25 :1 ( #2 on dial ) which will be 125 : 1 final ratio.

1. Motomuck  Snow Foam Gun for pressure washers: Use 10- 20 % Salty Muck with 80-90% water. Adjust the dial on the gun all the way to the right. Turn the dial towards the left if there are too many soap suds.
2. Mixer with spray nozzle: Use 100% Salty Muck in the reservoir cup.

Ensure you hose off all soap properly, with fresh water, before allowing the surface to dry.

Engine and Cooling System Flush

Use a Motomuck  mixer:  Attach the mixer to the garden hose, remove the reservoir cup, fill with Salty Muck and reinstall. Connect to the flushing apparatus and turn on the water. Flush motor for 2-5 minutes.

Soaking gear and equipment

Mix 120ml of Salty Muck per 4 litres of water in a container. Soak gear or equipment. Rinse with fresh water.

HAZARDS AND FIRST AID  

WARNING- Prolonged contact may cause mild skin irritation - rinse with water.

Irritant to eyes - Remove contact lenses, rinse with plenty of water.

Read label before use. Use only as directed. Keep out of reach of children.

If symptoms persist or feeling unwell after swallowed, seek medical advice or call the Poison Centre (NZ) 0800 764 766, (Australia) 13 11 26.

Have product label at hand. Dispose according to local regulations. Avoid release to the environment.