MARINE AND ENGINE DEGREASER in a 1 Litre adjustable Trigger Spray Bottle
A NO EFFORT PRODUCT
Safely removes oil, grease and dirt from engines and other mechanical components. Leaves a protective layer. PH Neutral.
PH Neutral Degreaser safe to use on all marine mechanical components that need cleaning. Safe on aluminium, fibreglass, steel, magnesium, chrome, plastic and rubber. Contains no silicones.
Contains: PH Neutral Ingredients
APPLICATION and DILUTION:
NOTE: Test product on hidden spot to ensure compatibility, prior to application. No liability will be accepted.
Cleaning and Washing
For application, use a recommended method below to apply a diluted ratio of Salty Muck to your boat or equipment. Agitate heavy grime if necessary.
STEP ONE
Spray undiluted over the dirty surface to be cleaned. ( Don’t apply on hot surfaces, or hot polycarbonate or acrylic surfaces if present. Test product on a hidden spot to ensure compatibility. No liability will be accepted. )
STEP TWO
Leave for 2 - 5 minutes and if necessary, agitate deeply ingrained dirt with a soft brush.
STEP THREE
Spray off with a jet of water to reveal the original finish. Repeat if necessary.
Saltymuck Marine and Engine Degreaser will leave a residual protection to maintain the finish and make future cleaning easier.
Please remember Bilge water will contain oil and grease, and should be pumped out in an environmentally responsible way.
HAZARDS AND FIRST AID
WARNING- Prolonged contact may cause mild skin irritation - rinse with water.
Irritant to eyes - Remove contact lenses, rinse with plenty of water.
Read label before use. Use only as directed. Keep out of reach of children.
If symptoms persist or feeling unwell after swallowed, seek medical advice or call the Poison Centre (NZ) 0800 764 766, (Australia) 13 11 26.
Have product label at hand. Dispose according to local regulations. Avoid release to the environment.