Pickup available at MotomuckNZ warehouse
Usually ready in 24 hours
Combo Pre-Wash Mud Foamer and Snow Foam Gun
1. Old Type Nilfisk, Kew, Alto / 1 x ( MFW1L + Foam Gun )(T)
-
MotomuckNZ warehouse
Pickup available, usually ready in 24 hours48A Parkway Drive
Rosedale
AUK
Auckland 0632
New Zealand+64275733489
Description
Combo MEGA#1 Mud Foamer and Snow Foam Gun
Please confirm your own pressure washer adaptor dimensions with the list of our adaptors above. Please note that a restocking and courier fee will apply for incorrectly ordered Foam Guns.
PH Neutral Pre-wash to get rid of the majority dirt and mud prior to final wash. With a fantastic fragrance.
Creates an impressive foam lather to encapsulate, soften and remove dirt and mud. Leaves a residue which aids with the final wash. Contains ingredients to help resist scratching.
Can be used safely for pre-washing or washing all vehicle body panels and guards, including painted, clear coated, vinyl wrapped and waxed surfaces. Also good to use on plastic or chrome bumpers and trimmings, glass, as well as across tyres and wheels.
No Acids, Abrasives or Caustic. Superior Results.
Application
Don’t apply on hot surface. Streaking can occur if Pre-Wash Mud Foamer tries to remove certain specific automotive products. Test product on hidden spot to ensure compatibility, prior to application. No liability will be accepted.
SNOW FOAM GUN METHOD
- Dilute 20% Pre-wash Mud Foamer into Snow Foam Gun bottle. Experiment with higher concentrations if needed.
- Adjust the dispense rate and spread on gun to create a dense foam.
- Foam the entire vehicle and allow to settle and penetrate for 5 minutes.
- Rinse off thoroughly with jet of water or pressure washer. See the mud dislodge and slide away.
- Use Motomuck Automotive Cleaner for final wash.
Tip: Remember that the amount and density of foam is dependant on your pressure washer's power, the size of the "jet" inside the Snow Foam Gun, and the concentration of the product.
HAND FOAM PUMP METHOD
- Dilute 20% Pre-Wash Mud Foamer into Hand Foam Pump bottle with water. Ensure contents are mixed well.
- Pressurise bottle and foam the vehicle.
- For Pre-wash allow to settle for 5 minutes and then rinse off thoroughly.
- Use Motomuck Automotive Cleaner for final wash.
PRESSURE WASHER METHOD
- Pour Pre-Wash Mud Foamer into Pressure washer dilution bottle.
- Spray over the dirt and mud with pressure washer.
- Allow to settle for a few minutes and then rinse off thoroughly.
- Use Motomuck Automotive Cleaner for final wash.
Features
- NZ Made
- Fantastic Hero Fragrance
- Extensive time dwell on foam
- Soft smooth lather
- Contains no acid, abrasive, caustic or silicones
- Amazing ability to soften and loosen mud and dirt
- Use as Pre-wash
Cautions
WARNING- Harmful if swallowed - rinse mouth and call poison centre.
Irritant to eyes- Remove contact lenses, rinse with plenty of water.
Read label before use. Use only as directed. Keep out of reach of children.
Prolonged contact may cause mild skin irritation- rinse with water.
If symptoms persist or feeling unwell after swallowed, seek medical advice or call the Poison Centre (NZ) 0800 764 766, (Australia) 13 11 26.
Have product label at hand.
Dispose according to local regulations.
Package Includes:
1 x 1L Mega#1 Clean
1 x Pressure Controlled Valve
1 x Duckbill Nozzle
1 x Plastic Bottle
1 x Pressure Washer Connector – ( Select from options #1 – #8 to fit your pressure system)
- Description
- Application
- Features
- Cautions
Description
Combo MEGA#1 Mud Foamer and Snow Foam Gun
Please confirm your own pressure washer adaptor dimensions with the list of our adaptors above. Please note that a restocking and courier fee will apply for incorrectly ordered Foam Guns.
PH Neutral Pre-wash to get rid of the majority dirt and mud prior to final wash. With a fantastic fragrance.
Creates an impressive foam lather to encapsulate, soften and remove dirt and mud. Leaves a residue which aids with the final wash. Contains ingredients to help resist scratching.
Can be used safely for pre-washing or washing all vehicle body panels and guards, including painted, clear coated, vinyl wrapped and waxed surfaces. Also good to use on plastic or chrome bumpers and trimmings, glass, as well as across tyres and wheels.
No Acids, Abrasives or Caustic. Superior Results.
Application
Don’t apply on hot surface. Streaking can occur if Pre-Wash Mud Foamer tries to remove certain specific automotive products. Test product on hidden spot to ensure compatibility, prior to application. No liability will be accepted.
SNOW FOAM GUN METHOD
- Dilute 20% Pre-wash Mud Foamer into Snow Foam Gun bottle. Experiment with higher concentrations if needed.
- Adjust the dispense rate and spread on gun to create a dense foam.
- Foam the entire vehicle and allow to settle and penetrate for 5 minutes.
- Rinse off thoroughly with jet of water or pressure washer. See the mud dislodge and slide away.
- Use Motomuck Automotive Cleaner for final wash.
Tip: Remember that the amount and density of foam is dependant on your pressure washer's power, the size of the "jet" inside the Snow Foam Gun, and the concentration of the product.
HAND FOAM PUMP METHOD
- Dilute 20% Pre-Wash Mud Foamer into Hand Foam Pump bottle with water. Ensure contents are mixed well.
- Pressurise bottle and foam the vehicle.
- For Pre-wash allow to settle for 5 minutes and then rinse off thoroughly.
- Use Motomuck Automotive Cleaner for final wash.
PRESSURE WASHER METHOD
- Pour Pre-Wash Mud Foamer into Pressure washer dilution bottle.
- Spray over the dirt and mud with pressure washer.
- Allow to settle for a few minutes and then rinse off thoroughly.
- Use Motomuck Automotive Cleaner for final wash.
Features
- NZ Made
- Fantastic Hero Fragrance
- Extensive time dwell on foam
- Soft smooth lather
- Contains no acid, abrasive, caustic or silicones
- Amazing ability to soften and loosen mud and dirt
- Use as Pre-wash
Cautions
WARNING- Harmful if swallowed - rinse mouth and call poison centre.
Irritant to eyes- Remove contact lenses, rinse with plenty of water.
Read label before use. Use only as directed. Keep out of reach of children.
Prolonged contact may cause mild skin irritation- rinse with water.
If symptoms persist or feeling unwell after swallowed, seek medical advice or call the Poison Centre (NZ) 0800 764 766, (Australia) 13 11 26.
Have product label at hand.
Dispose according to local regulations.
Package Includes:
1 x 1L Mega#1 Clean
1 x Pressure Controlled Valve
1 x Duckbill Nozzle
1 x Plastic Bottle
1 x Pressure Washer Connector – ( Select from options #1 – #8 to fit your pressure system)