Please confirm your own pressure washer adaptor dimensions with the list of our adaptors above. Please note that a restocking and courier fee will apply for incorrectly ordered Under Vehicle Cleaners with adaptors.
Getting under your 4x4, truck, trailer or vehicle to wash off muck, sand, dirt or salt has never been easier.
The Motomuck Muck Blaster attaches to your pressure washer, and allows you to comfortably walk around the vehicle while manoeuvring the unit. It uses 4 powerful jets to direct pressure upward and under your vehicle.
Re-configure the Muck Blaster to also become a water broom, and wash the dirt from your driveway. Rolling with ease on its bearing wheels.
Match the correct adaptor to the coupling on your pressure washer and select from the options in the drop down above. Please check carefully to ensure that you choose the correct fitment for your pressure system, this is only a guide.
Package Includes:
1 x Motomuck Muck Blaster Under Vehicle Cleaner
1 x 45-degree curved wand
2 x Straight extension wands
1 x Pressure Washer Adaptor – ( Select from options #1 – #9 to fit your pressure system)
1 x Soap Applicator and dilution bottle for Under Vehicle Cleaner.
1 x 1L SALTY MUCK Salt Wash and Surface Protection.
1 x 1L Automotive Cleaner with our famous Nano protection.
Features
- Durable Rubber Wheels
- Easy Rolling Bearings
- 4 High Pressure Nozzles
- 3 x Quick Connect Extension Wands
- Robust Chassis
- Quality Brass Pivoting Coupler and Stainless Steel Construction
Directions
- Firstly attach the 2 x straight extensions to the main unit, then attach the 45-degree angled extension.
- Attach the adapter that suits your pressure washer, or if you have a quick connect high pressure washer then use the blaster as is.
- Attach to your water blaster / pressure washer, usually at a point half way down the wand.
- Can be used as an Under Vehicle Cleaner or a Road Cleaner / Broom. Just adjust the pivoting coupler where the extension attaches to the cleaner. Pull out the small nut, and rotate the coupler so that the water nozzles either point upwards or forwards for the required application.
- Recommended for connecting to a water blaster / pressure washer of between 2000 psi to 4000 psi.
- Ensure you have chosen the correct Under Vehicle Cleaner / Adaptor combination for your specific pressure washer.
Advice for Use:
Use the Motomuck Soap applicator and dilution bottle, if you are wanting to use the Under Vehicle Cleaner to apply our Motomuck Automotive Cleaner to all those hard to reach places, before washing off.
We recommend your pressure washer has an inline filter attached, to avoid the nozzles being blocked by debris. If blocked then remove the nozzle, clean with a needle and rinse with water.
Care Instructions
Run some clean water through the Muck Blaster if you have been using it to apply soap products. This will ensure the jets remain clear from soap build up.